Data Tap/Splitter/Port Combiner - ULI-250/260

RS-232 Data Tap monitors and records serial data streams. RS-232 Modem Data Splitter connects two PCs to one peripheral without switching.

BB-232CDT

Tap in on a serial data stream and transparently feed another monitor, printer or other device. Model 232CDT has DIP switches that allow you to monitor the main Transmit and Receive lines individually or together. The male RS-232 connector on the top and the female RS-232 connector on the bottom are connected straight through, pin for pin. These connectors are used to connect the device – in series – with the RS-232 line to be tapped.
BB-9PCDT

Tap in on a serial data stream and transparently feed another monitor, printer or other device. Model 9PCDT allows an RS-232 port to tap into and check data being transmitted between two other RS-232 ports. DIP switches set programming to monitor the main Transmit and Receive lines individually or together. Choose between monitoring the DCE or DTE port. Also allows the monitoring port to be either DTE or DCE. The DTE connector is male, and DCE and TAP connectors are female.
BB-9PMDS

Model BB-9PMDS connects two computers or terminals to one modem without switching. The RS-232 splitter can combine two 9-pin DTE ports to one 9-pin DCE port.